Gravity Simulator - Planetary Formation setup

Welcome, Guest. Please Login.

	04/22/18 at 22:32:15 News: Registration for new users has been disabled to discourage spam. If you would like to join the forum please send me an email with your desired screen name to tony at gravitysimulator dot com.

Gravity Simulator › General › Discussion
(Moderator: Tony)

‹ Previous topic | Next topic ›

Pages: 1

Planetary Formation setup (Read 2722 times)

abyssoft

YaBB Administrator

I love YaBB 1G -
SP1!

Posts: 302

Planetary Formation setup
06/07/06 at 21:04:08

Well to put it mildly it's a bit large So I've list a link to it below it resides on my own servers. It runs from 0 time until after 51 mil years it will take a long time to fully run it. The last object set is added after 50 mil years but let the sim complete out another mil years to get a final setup.

Starting masses on all the bodies are between pluto and mercury in size.

http://abyssoft.servegame.org/Gravsim/PB-GS-1sol_mass_star.htm

IP Logged

abyssoft

YaBB Administrator

I love YaBB 1G -
SP1!

Posts: 302

Re: Planetary Formation setup
Reply #1 - 06/08/06 at 14:12:23

small correction to the simulation setup

subtract 4361.112 earth mass from the starting star.

***
additional note a lower time step provides a more realistic view of what happens keeping mind that this will also increase the time needed for the sim to run to conclusion.
(sp)

***
If you have the Beta of next version I recommend a DoEvents setting of 15-30 depending on the speed of your system and memory availability. I personally use 25.

« Last Edit: 06/11/06 at 11:08:52 by abyssoft »

IP Logged

abyssoft YaBB Administrator I love YaBB 1G - SP1! Posts: 302	Re: Planetary Formation setup Reply #2 - 08/15/06 at 17:59:56 Working on a new setup for the next version of GSim. if everything works right you may not have to do anything other then open it and let it run
Back to top	IP Logged

Pages: 1

Gravity Simulator › General › Discussion
(Moderator: Tony)

‹ Previous topic | Next topic ›